STRING: thermistor string to measure ground temperature - Calypsobyen

RI map

Contact
Krzysztof Senderak
krzysztof.senderak@uwr.edu.pl
Info
land platform (fixed)
Operational
Yes
Observation Facility ID
12089
Geospatial location
POINT (14.50072 77.56511)
2.83
Environment
On the coastal section selected for drilling at Calypsobyen, the bedrock contains siltstone and sandstone forming relict abrasion platforms, which are currently covered by loose sand and gravel beach sediments. The borehole was located near the mouth of the Scott River (right bank), at a distance of about 75 m from the shoreline and 900 m from the station. After stopping the drilling progress again at 5 m below sea level, a decision was made to install a string in the third hole.

CRIOS – Cryosphere Integrated Observation Network on Svalbard
Project financed from the EEA Financial Mechanism 2014-2021 operated by the National Science Centre in Poland
Agreement no. UMO-2022/43/7/ST10/00001 to a predefined project no. 2022/43/7/ST10/00001
Project period: 08.09.2022 - 30.04.2024 (2029)

Additional contact persons: Piotr Zagórski (piotr.zagorski@mail.umcs.pl), Dariusz Ignatiuk (dariusz.ignatiuk@us.edu.pl)
Observed Variable(s)
CRYOSPHERE>FROZEN GROUND>PERMAFROST>PERMAFROST TEMPERATURE
Thermistor string was manufactured by Geoprecision GmbH of Germany.
Service of the thermistor string is planned at least once a year at the end of summer season. The battery in the logger should be replaced once every 5 years.
Thermistor string has the sensors at the following depths: 0.0, 0.05, 0.1, 0.2, 0.5 (a), 0.5 (b), 1.0, 1.5 (a), 1,5 (b), 2.0, 2.5 (a), 2.5 (b), 3.0, 3.5 (a), 3.5 (b), 4.0, 4.5, 5.0 m. Sampling every 1 hour and saving to internal memory.